Door Lock Control Module Scan Tool Information (Driver)
Driver Door Switch Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Battery Voltage Signal | Varies | This displays volts. This is the voltage input supplied to the driver door switch. |
| Door Key Cyl. Unlock Switch | Idle | The scan tool displays Idle or Unlock. This is the state of the driver door key cylinder unlock switch. |
| Door Lock Actuator Cmd. | Off | The scan tool displays Off, Unlock or Lock. This is the state of the door lock actuator. |
| Driver Door Ajar Sw. | Inactive | The scan tool displays Active or Inactive. This is the state of the driver door ajar switch. |
| Driver Door Open Sw. | Inactive | The scan tool displays Active or Inactive. This is the state of the driver door open switch. |
| Driver LF Window Switch | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch. |
| Driver LR Window Switch | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left rear window switch. |
| Driver RF Window Switch | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right front window switch. |
| Driver RR Window Switch | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right rear window switch. |
| Memory Recall Switches | Varies | This displays volts. This is the voltage input supplied to the driver door memory recall switches. |
| Memory Switch 12V Ref. | Varies | This displays volts. This is the voltage input supplied to the driver door memory switch. |
| Memory Switch Backlight | Varies | The scan tool displays %. This is the intensity of the backlighting in the memory switch. |
| Mirror 5 Volt Reference | ON | The scan tool displays On or Off. This is the state of the voltage reference circuit to the mirror. |
| Mirror Fold Switch | Idle | The scan tool displays Idle, Extend or Retract. This is the state of the mirror fold switch. |
| Mirror Motor | Idle | The scan tool displays Idle, Invalid, Up, Down, Left and Right. This is the state of the mirror motor. |
| Mirror Horizontal Position | Varies | This displays volts. This is the voltage input supplied to the mirror horizontal position. |
| Mirror Select Switch | Idle | The scan tool displays Idle, Right or Left. This is the state of the mirror select switch. |
| Mirror Vertical Position | Varies | This displays volts. This is the voltage input supplied to the mirror vertical position. |
| Rear Window Sw. 12V Ref. | Varies | This displays volts. This is the voltage input supplied to the rear window switch. |
| Seat Back Heat Mode Ind. Cmd. | Off | The scan tool displays On or Off. This is the state of the seat back heat mode indicator. |
| Seat Back Heat Mode Sw. | Inactive | The scan tool displays Active or Inactive. This is the state of the seat back heat mode switch. |
| Seat Cool Mode Ind. Cmd. | Off | The scan tool displays On or Off. This is the state of the seat cool mode indicator. |
| Seat Cool Mode Switch | Off | The scan tool displays On or Off. This is the state of the seat cool mode switch. |
| Seat Heat High Ind. Cmd. | Off | The scan tool displays On or Off. This is the state of the seat heat high indicator. |
| Seat Heat Medium Ind. Cmd. | Off | The scan tool displays On or Off. This is the state of the seat heat medium indicator. |
| Seat Heat Low Ind. Cmd. | Off | The scan tool displays On or Off. This is the state of the seat heat low indicator. |
| Seat Heat Mode Cmd. | Off | The scan tool displays On or Off. This is the state of the seat heat mode. |
| Seat Heat Mode Sw. | Inactive | The scan tool displays Active or Inactive. This is the state of the seat heat mode switch. |
| VIN Learned | Yes | The scan tool displays Yes or No. This is the state of the driver door switch VIN programming. |
| Window Lockout Switch | Off | The scan tool displays On or Off. This is the state of the driver door window lockout switch. |
| Window Lockout Switch Indicator Command | Off | The scan tool displays On or Off. This is the state of the driver door window lockout switch indicator. |
| Window Switch Backlight | Varies | The scan tool displays %. This is the intensity of the backlighting in the window switch. |
Driver Door Switch Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Door Deadbolt Lock/Unlock | This command will lock and unlock the driver door dead bolt actuator. |
| Door Lock/Unlock | This command will lock and unlock the driver door lock actuator. |
| Front Window Motor | This test will command the front window both up and down. |
| Heated Seat Indicators | This will command the heated seat indicators ON and OFF. |
| Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the integrated switches backlighting. |
| Mirror Fold | This will command the driver mirror to fold and unfold. |
| Mirror Heater | This will command the driver mirror heater ON and OFF. |
| Mirror Left/Right | This will command the driver mirror left and right. |
| Mirror Up/Down | This will command the driver mirror up and down. |
| Non-Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the non-integrated switches backlighting. |
| Power Window Motor Programming | This will enable the driver power window motor to be programmed. |
| Puddle/Courtesy Lamp | This will command the courtesy lamps ON and OFF. |
| Window Lockout Indicator | This will command the window lockout indicator ON and OFF. |