LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Traverse LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> Passenger Presence System Preload Test >> Passenger Presence System Preload System Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger Presence System Preload System Test Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. With Service Programming System (SPS) , unlock the passenger presence module.
  2. Empty the front outboard passenger seat.
  3. With the scan tool, perform the Passenger Presence Preload procedure.
  4. If the test fails, adjust the seat bottom trim, and massage the cover to ensure unwanted pressure is not present in the specified area, and restart the Passenger Presence Preload procedure (Existing Module).
  5. Once the test successfully completes, cycle the ignition key OFF.
  6. Perform the Diagnostic System Check - Vehicle after successfully completing the preload test procedure to ensure the system is functioning properly.
scientia non olet · About LEMON Manuals