Circuit/System Verification
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition On/Vehicle in Service Mode.
- Verify the scan tool parameter:Liftgate Rear Close Switch=Inactive
- If not the specified state
Refer to: Circuit/System Testing
- If the specified state
- If not the specified state
- Operate the component:B70 Liftgate Close Switch»Pressed
Verify the scan tool parameter:Liftgate Rear Close Switch=Active
- If not the specified state
Refer to: Circuit/System Testing
- If the specified state
- If not the specified state
- All OK.