Static Test
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the M72 Variable Power Steering Solenoid Valve.
- Test for 2.5-10 Ω between the control terminals A and B.
- If not within the specified range, replace the M72 Variable Power Steering Solenoid Valve.
- Test for infinite resistance between each terminal and the M72 Variable Power Steering Solenoid Valve housing/case.
- If not the specified value, replace the M72 Variable Power Steering Solenoid Valve.