LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Antilock Brake System) >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction (With C67/CJ2) >> Circuit/System Verification
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON
  2. Verify the instrument cluster indicators listed below turn On and Off when commanding the All Indicators On and Off with a scan tool.
    • Stability control off indicator
    • Traction control off indicator
    • Traction/stability control indicator
    • If any indicator does not turn On and Off 

      Replace the P16 Instrument Cluster.

    • If all indicators turns On and Off 
  3. Verify the scan tool Body Control Module Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the traction control switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  4. All OK.
scientia non olet · About LEMON Manuals