K17 Electronic Brake Control Module

Connector Part Information

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray	Core Crimp	Insulation Crimp
I	Pending	Pending	Pending	Pending	Pending	Pending	Pending

Pin	Size	Color	Circuit	Function	Terminal Type ID	Option
1	4	RD/GY	1042	Battery Positive Voltage	I	-
2	-	-	-	Not Occupied	-	-
3	0.5	BN	6305	Brake Vacuum Switch Signal	I	-
4	0.5	YE	872	Wheel Speed Sensor Signal Right Front	I	-
5	0.5	YE/RD	6031	Brake Vacuum Sensor 5 Volt Reference	I	-
6	-	-	-	Not Occupied	-	-
7	0.5	L-GN/GY	333	Brake Fluid Level Sensor Signal	I	-
8	0.5	GY	830	Wheel Speed Sensor Signal Left Front	I	-
9-12	-	-	-	Not Occupied	-	-
13	4	BK	250	Ground	I	-
14	0.5	WH	2501	High Speed GMLAN Serial Data (-) (1)	I	-
15	0.5	WH	2501	High Speed GMLAN Serial Data (-) (1)	I	-
16	0.5	GY/BN	7065	Wheel Speed Sensor Supply Voltage Right Front	I	-
17	0.5	GY/YE	7128	Wheel Speed Sensor Supply Voltage Right Rear	I	-
18	0.5	L-BU	884	Wheel Speed Sensor Signal Left Rear	I	-
19	0.5	GY/WH	7064	Wheel Speed Sensor Supply Voltage Left Front	I	-
20	0.5	WH	6106	High Speed GMLAN Serial Data (-) (2)	I	-
21-24	-	-	-	Not Occupied	-	-
25	1.5	RD/YE	3740	Battery Positive Voltage	I	-
26	0.5	L-BU	2500	High Speed GMLAN Serial Data (+) (1)	I	-
27	0.5	L-BU	2500	High Speed GMLAN Serial Data (+) (1)	I	-
28	0.5	WH/L-BU	5986	Serial Data Communication Enable	I	-
29	0.5	VT	882	Wheel Speed Sensor Signal Right Rear	I	-
30	-	-	-	Not Occupied	-	-
31	0.5	GY/BK	7127	Wheel Speed Sensor Supply Voltage Left Rear	I	-
32	0.5	BK/YE	6032	Brake Vacuum Sensor Low Reference	I	-
33	0.5	L-BU/YE	6105	High Speed GMLAN Serial Data (+) (2)	I	-
34	-	-	-	Not Occupied	-	-
35	0.5	L-GN/BN	2087	Combined Vehicle Inertial Sensor Supply Voltage	I	-
36	-	-	-	Not Occupied	-	-
37	0.5	YE/VT	6030	Brake Vacuum Sensor Signal	I	-
38	1.5	BK	250	Ground	I	-