LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Express 1500 LS, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions (Battery, Charging System And Starting System) >> Battery Current Sensor Replacement (Battery, Charging System And Starting System) >> Removal Procedure (Battery, Charging System And Starting System)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure (Battery, Charging System And Starting System)

    Fig 1: View Of Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the instrument panel (I/P) harness electrical connector (1) from the battery current sensor.
  2. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (V8) , Battery Negative Cable Replacement (V6) , Battery Negative Cable Replacement (LGH-Primary) .
  3. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  4. Squeeze the negative battery cable branches together.
    5. NOTE:

    Note the position of the battery current sensor prior to removal.

  5. Slide the battery current sensor (1) off of the negative battery cable.
scientia non olet · About LEMON Manuals