Removal Procedure (Battery, Charging System And Starting System)
- Disconnect the auxiliary battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Courtesy of GENERAL MOTORS COMPANY
- Remove the positive extension cable nut from the junction block and disconnect the cable.
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement
.
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement
.
Courtesy of GENERAL MOTORS COMPANY
- Remove the positive extension cable nut from the intake air heater and disconnect the cable.
- Disconnect the wiring harness clips.
- Remove the battery positive cover from the underhood bused electrical center (UBEC).
- Remove the positive extension cable nut from the UBEC terminal stud.
- Remove the positive extension cable.