Circuit/System Verification
- Ignition ON.
- Verify that DTC B285A 39 or B285A 4B is not set.
- DTC B285A 39 is set NOTE:
DO NOT replace the K40D Seat Memory Control Module - Driver.
Replace the K99 Steering Column Position Control Module .
- DTC B285A 4B is set
- Perform the Steering Column Tilt Wheel and Telescope Control Module Learn. Refer to Steering Column Tilt Wheel and Telescope Control Module Learn
- Verify that DTC B285A 39 does not reset.
- DTC B285A 4B is set, replace the K99 Steering Column Position Control Module .
NOTE:DO NOT replace the K40D Seat Memory Control Module - Driver.
- DTC B285A 4B is not set
- All OK
- DTC B285A 39 or B285A 4B is not set.
- DTC B285A 39 is set
- All OK.