Component Test

WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Static Test

Ignition OFF, disconnect the harness connector at the S48A Multifunction Switch - Instrument Panel.
Test for infinite resistance between the control circuit terminal 10 and ground circuit terminal 2.
- If less than infinite resistance
  Replace the S48A Multifunction Switch - Instrument Panel.
- If infinite resistance
Test for less than 10 Ω between the control circuit terminal 10 and ground circuit terminal 2 while pressing the lane departure warning switch.
- If 10 Ω or greater
  Replace the S48A Multifunction Switch - Instrument Panel.
- If less than 10 Ω
All OK.