LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Spark EV >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Battery Current Sensor
    GM2917959Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the connector (1) to the battery current sensor (2) and remove the battery current sensor from the battery tray.
    3. Fig 2: Battery Negative Ground Cable Fastener
    GM2917958Courtesy of GENERAL MOTORS COMPANY
  3. Remove the battery negative ground cable fastener (1) and the battery negative cable (2), from the frame rail.
    4. Fig 3: Battery Current Sensor
    GM2917957Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the orientation of the battery current sensor when removing.

  4. Remove the battery current sensor (2) from the battery negative cable (1).
scientia non olet · About LEMON Manuals