LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.2L - Repair Instructions >> Repair Instructions >> Fuel Injection Fuel Rail Assembly Replacement (LFM) >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Relieve the fuel pressure. Refer to Fuel Pressure Relief .
  3. Remove the upper intake manifold. Refer to Upper Intake Manifold Replacement (LFM) .
  4. Remove the 4 ignition coil connectors. Refer to Ignition Coil Replacement (LL0) , Ignition Coil Replacement (LFM) .
  5. Remove the positive crankcase ventilation hose. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LL0) , Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LFM) .
  6. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. Remove the intake manifold rear bracket. Refer to Lower Intake Manifold Replacement (LFM) .
    8. Fig 1: Fuel Rail Retaining Bolts
    GM3416005Courtesy of GENERAL MOTORS COMPANY
  8. Remove the fuel rail retaining bolts (1, 2).
  9. Lower the vehicle.
    10. Fig 2: Fuel Feed Hose Connector
    GM3416007Courtesy of GENERAL MOTORS COMPANY
  10. Disconnect the fuel feed hose connector (1) from the fuel rail.
  11. Disconnect the 4 fuel injector electrical connectors and remove the fuel injector rail wiring harness (2).
  12. Remove the fuel rail and fuel injector (3).
scientia non olet · About LEMON Manuals