LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Traverse LS, 4D Utility >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the wheel speed sensor to the wheel knuckle.
    Fig 1: Identifying Wheel Speed Sensor Bolt
    GM1861969Courtesy of GENERAL MOTORS COMPANY
  2. Install the wheel speed sensor bolt.
    CAUTION: Refer to Fastener Caution .

    Tighten 

    Tighten the bolt to 9 N.m (80 lb in).

  3. Install the wheel speed sensor wire harness routing clips to the upper suspension link.
    Fig 2: View Of Wheel Speed Sensor Wire Harness Routing Clip
    GM1861966Courtesy of GENERAL MOTORS COMPANY
  4. Install the wheel speed sensor wire harness routing clips (3) to the upper suspension link.
    Fig 3: Identifying Wheel Speed Sensor Electrical Connector
    GM1861964Courtesy of GENERAL MOTORS COMPANY
  5. Install the wheel speed sensor wire harness grommet (2) to the lower control arm bracket.
  6. Connect the wheel speed sensor electrical connector (1).
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  8. Perform the Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals