LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Traverse LT, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Programming And Setup - All Systems) >> Repair Instructions >> Side Object Sensor Programming and Setup >> Replace and Program ECU or Reprogram ECU
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program ECU or Reprogram ECU

WARNING: This page is about a different car, the 2015 GMC Acadia, 2015 Chevrolet Traverse, and 2015 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing ECU, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select Right Side Object Sensor or Left Side Object Sensor - Programming and follow the on-screen instructions.
  3. At the end of programming, choose the "Clear DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals