Transmission Input Speed Sensor
- Ignition OFF, disconnect the ISS wiring harness connector X3 (1) from the control solenoid valve assembly.
- Ignition ON, test for 8.3-9.3 volts at terminal A.
- Ignition OFF, using the EL 35616
terminal test kit, connect the EL38522
variable signal generator red lead to the ISS signal circuit terminal B on the TCM.
- Connect the black lead from the EL 38522
variable signal generator to ground.
- Set the EL 38522
variable signal generator to 5 volts, the frequency to 300 Hz and the percent duty cycle to 50 or the normal position.
- Ignition ON, verify with a scan tool the Transmission ISS parameter is between 495-505 RPM.