LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Traverse LTZ, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - 6T75 (M7V M7X) - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Control Solenoid Valve and Transmission Control Module Assembly Input Shaft Speed/Output Shaft Speed Input Test >> Transmission Output Speed Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Output Speed Sensor

  1. Ignition OFF, disconnect the OSS wiring harness connector X4 (2) from the control solenoid valve assembly.
  2. Ignition ON, test for 8.3-9.3 volts at terminal A.
  3. Ignition OFF, using the EL 35616  terminal test kit, connect the EL 38522  variable signal generator red lead to the OSS signal circuit terminal B on the TCM.
  4. Connect the black lead from the EL 38522  variable signal generator to ground.
  5. Set the EL 38522  variable signal generator to 5 volts, the frequency to 300 Hz and the percent duty cycle to 50 or the normal position.
  6. Ignition ON, verify with a scan tool the Transmission OSS parameter is between 256-266 RPM.
scientia non olet · About LEMON Manuals