Circuit/System Verification
- Ignition ON.
- Verify the scan tool Rear Closure Ajar Switch parameter changes between Inactive and Active when opening and closing the liftgate.
- If the parameter does not change
Refer to Door Ajar Indicator Malfunction
- If the parameter changes
- If the parameter does not change
- Verify the Scan Tool Rear Wiper Switch Parameter changes between ON and OFF when cycling the rear wiper switch ON and OFF.
- If the parameter does not change
- Refer to Circuit/System Testing - Rear Wiper/Washer Switch Malfunction
- If the parameter changes
- Verify the M45 Rear Wiper Motor cycles when commanding the rear wiper ON with the rear wiper switch
- If the M45 Rear Wiper Motor does not cycle
Refer to Refer to Circuit/System Testing - Rear Wiper Motor Malfunction
- If the M45 Rear Wiper Motor cycles
- If the M45 Rear Wiper Motor does not cycle
- Verify the M45 Rear Wiper Motor returns to the park position when the rear wipers are turned OFF
- If the M45 Rear Wiper Motor does not return to the park position
Refer to Circuit/System Testing - Rear Wiper Motor Malfunction
- If the M45 Rear Wiper Motor returns to the park position
- If the M45 Rear Wiper Motor does not return to the park position
- All OK.