LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Trax LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Sensor Replacement (KL9) >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Sensor Electrical Connector
    GM4098026Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the electrical connector.(1)
    2. Fig 2: Battery Negative Cable
    GM4098029Courtesy of GENERAL MOTORS COMPANY
  2. Use an open ended wrench to hold the battery sensor ground tab, while loosening the battery negative cable nut.
  3. Battery Negative Cable Nut (3) - Remove
  4. Battery Negative Cable(2) - Remove
    5. Fig 3: Battery Sensor Module
    GM4098031Courtesy of GENERAL MOTORS COMPANY
  5. Battery Negative Post Clamp Nut (1) - Loosen
  6. Battery Sensor Module(2) - Remove
scientia non olet · About LEMON Manuals