LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Trax LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Object Detection System And Pedestrian Protection System) >> Repair Instructions >> Side Object Sensing Alert Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Side Object Sensing Alert Module Replacement

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Side Object Sensing Alert Module
GM3820479Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
1 Side Object Sensing Alert Module Fastener (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Side Object Sensing Alert Module

Procedure

  1. Disconnect the electrical connector.
  2. For programming and set up, refer to Control Module References .
scientia non olet · About LEMON Manuals