Object Alarm Module Scan Tool Information
Parking Assist Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Parking Assist ON | |||
| Advanced Parking Assist Switch | - | Active/Inactive | The scan tool displays Active or Inactive depending on the state of the advanced parking assist switch. |
| Calculated Transmission Range | Transmission in reverse | Varies | The scan tool displays Park, Reverse, Neutral, Drive or Unknown depending on the state of the commanded gear. |
| Front Red LED | Parking assist Active, No object in front of the vehicle | Off | The scan tool displays On and Off. |
| Parking assist Active, Object between 0.3-0.6 m (1-1.9 ft) in front of the vehicle | On | ||
| Front Yellow 1 LED | Parking assist Active, No object in front of the vehicle | Off | The scan tool displays On and Off. |
| Parking assist Active, Object between 1-2.5 m (3.3-8.2 ft) in front of the vehicle | On | ||
| Front Yellow 2 LED | Parking assist Active, No object in front of the vehicle | Off | The scan tool displays On and Off. |
| Parking assist Active, Object between 0.6-1 m (1.9-3.3 ft) in front of the vehicle | On | ||
| Parking Assist Attached Object Status | - | Yes/No | The scan tool displays Yes or No. Yes is displayed if there is an object within the measuring range of the object sensors. |
| Parking Assist Chime | - | Varies | The scan tool displays On or Off. On is displayed if there is an object within the measuring range of the object sensors. |
| Parking Assist Disable History 1 | - | Varies | The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history. |
| Parking Assist Disable History 2 | - | Varies | The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history. |
| Parking Assist Disable History 3 | - | Varies | The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history. |
| Parking Assist Disable History 4 | - | Varies | The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history. |
| Parking Assist Disable History 5 | - | Varies | The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history. |
| Parking Assist Disable History 6 | - | Varies | The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history. |
| Parking Assist Disable History 7 | - | Varies | The scan tool displays None, Manual Disable, Park Brake Applied, Trailer or Other Attached Object, Excessive Speed in Reverse, No or Invalid Sensor Signals, Sensor Disturbance, Sensors Dirty, Sound Signal Return Time Not Plausible. This is the state of the park assist disable history. |
| Parking Assist Sensors | - | Varies | The scan tool displays On or Off. |
| Parking Assist Sensors Reference Voltage | - | 7.3-9.1 V | The scan tool displays V. This is the amount of voltage being sent to the object sensors. |
| Parking Assist Speaker Voltage | - | V | The scan tool displays V depending on the voltage supplied to the parking assist speaker. |
| Parking Assist Switch | - | Varies | The scan tool displays Active or Inactive depending on the state of the parking assist switch. |
| Parking Assist Switch LED | - | Varies | The scan tool displays On or Off depending on the state of the parking assist switch LED. |
| Parking Assist System Status | - | Enable | The scan tool displays Disable, Enable, Inhibited or Failed. This is the state of the parking assist system. |
| Power Mode | - | Run | The scan tool displays Off, Accessory, Run or Crank. This is the state of the ignition switch. |
| Rear Red LED | Parking assist Active, No object behind the vehicle | Off | The scan tool displays On and Off. |
| Parking assist Active, Object between 0.3-0.6 m (1-1.9 ft) behind the vehicle | On | ||
| Rear Yellow 1 LED | Parking assist Active, No object behind the vehicle | Off | The scan tool displays On and Off. |
| Parking assist Active, Object between 1-2.5 m (3.3-8.2 ft) behind the vehicle | On | ||
| Rear Yellow 2 LED | Parking assist Active, No object behind the vehicle | Off | The scan tool displays On and Off. |
| Parking assist Active, Object between 0.6-1 m (1.9-3.3 ft) behind the vehicle | On | ||
| Side Object Detection Disable History 1 | - | Varies | The scan tool displays None, Invalid Signal Received, Manual Disable, Sensors Dirty, Temporarily Unavailable or Not Plausible. This is the state of the side object detection disable history. |
| Side Object Detection Disable History 2 | - | Varies | The scan tool displays None, Invalid Signal Received, Manual Disable, Sensors Dirty, Temporarily Unavailable or Not Plausible. This is the state of the side object detection disable history. |
| Side Object Detection Disable History 3 | - | Varies | The scan tool displays None, Invalid Signal Received, Manual Disable, Sensors Dirty, Temporarily Unavailable or Not Plausible. This is the state of the side object detection disable history. |
| Side Object Detection Disable History 4 | - | Varies | The scan tool displays None, Invalid Signal Received, Manual Disable, Sensors Dirty, Temporarily Unavailable or Not Plausible. This is the state of the side object detection disable history. |
| Side Object Detection Disable History 5 | - | Varies | The scan tool displays None, Invalid Signal Received, Manual Disable, Sensors Dirty, Temporarily Unavailable or Not Plausible. This is the state of the side object detection disable history. |
| Side Object Detection Disable History 6 | - | Varies | The scan tool displays None, Invalid Signal Received, Manual Disable, Sensors Dirty, Temporarily Unavailable or Not Plausible. This is the state of the side object detection disable history. |
| Side Object Detection Disable History 7 | - | Varies | The scan tool displays None, Invalid Signal Received, Manual Disable, Sensors Dirty, Temporarily Unavailable or Not Plausible. This is the state of the side object detection disable history. |
| System Voltage | - | 11-14 V | The scan tool displays V. This is the current battery voltage. |
Parking Assist Control Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Advanced Park Assist LED | The parking assist control module illuminates the advanced park assist LED of the when commanded from the scan tool. |
| Clear Disable History Data | The parking assist control module clears the disable history data when commanded from the scan tool. |
| Front Red LED | The parking assist control module illuminates the front red LED of the parking assist indicator when commanded from the scan tool. |
| Front Yellow 1 LED | The parking assist control module illuminates the 1st front yellow LED of the parking assist indicator when commanded from the scan tool. |
| Front Yellow 2 LED | The parking assist control module illuminates the 2nd front yellow LED of the parking assist indicator when commanded from the scan tool. |
| Rear Red LED | The parking assist control module illuminates the rear red LED of the parking assist indicator when commanded from the scan tool. |
| Rear Yellow 1 LED | The parking assist control module illuminates the 1st rear yellow LED of the parking assist indicator when commanded from the scan tool. |
| Rear Yellow 2 LED | The parking assist control module illuminates the 2nd rear yellow LED of the parking assist indicator when commanded from the scan tool. |