Serial Data Gateway Module Replacement

Fig 1: Serial Data Gateway Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .
1	Serial Data Gateway Module Procedure Press on the tabs to release the serial data gateway module. Disconnect the electrical connectors. Reprogram the serial data gateway module if replaced. Refer to Control Module References .

Callout

Component Name

Preliminary Procedures
Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .

Serial Data Gateway Module

Procedure

Press on the tabs to release the serial data gateway module.
Disconnect the electrical connectors.
Reprogram the serial data gateway module if replaced. Refer to Control Module References .