LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Captiva Sport LS >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Body Control Module Programming and Setup >> Programming the BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the BCM

NOTE:

After the procedure is completed, the personalization settings of the BCM are set to default settings. Inform the customer that the personalization must be set again.

NOTE:

The vehicle will not start and many other functions may not operate properly if a replacement BCM is not properly set up. The following procedures must be followed:

  1. Programming the BCM. Refer to Service Programming System (SPS) .
  2. Brake Pedal Position Sensor Calibration. Refer to Brake Pedal Position Sensor Calibration .
  3. Learning the Restraints ID.
scientia non olet · About LEMON Manuals