Communication Center Call Transceiver Programming and Setup

This device requires no SPS programming or setup. However, if the module has been replaced, the following procedures are required:

• Program the vehicle VIN number into the replacement part by making the following scan tool selections:
  • Telematic Veh. Locate and Immo.
  • Module Setup
  • Program VIN

    If for some reason the Tech 2 can not read the VIN, you will have to manually enter the VIN.

• After the VIN has been programmed into the module, the dealer will need to update the Brazil database with the new SIM number for the replacement part.
• If the vehicle has been disabled, the dealer will need to call the Brazil government hotline to have the unit reset.