LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Transmission Control Module Programming and Setup >> Transmission Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Module Replacement

If the transmission control module (TCM) needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Transmission Control Module - Programming and follow the on-screen instructions.
  3. Perform the SPS function Transmission Control Module - Configuration & Setup and follow the on-screen instructions. On the screen Control Module - Configuration and Setup Function(s), select both Control Module Configuration/Reconfiguration and Control Module Setup.
  4. Clear DTCs after completing the programming procedure.