Component Testing

Forward Collision Alert Switch

1. Ignition OFF, disconnect the harness connector at the S70L Steering Wheel Controls Switch - Left.
2. Test for 7.0 k - 10.5 kΩ between the control terminal 10 and the signal circuit terminal 5.
   • If not between 7.0 k - 10.5 kΩ 

     Replace the S70L Steering Wheel Controls Switch - Left.

   • If between 7.0 k - 10.5 kΩ 
3. Test for 2.1 k - 3.1 kΩ between the control terminal 10 and the signal circuit terminal 5 while pressing the switch.
   • If not between 2.1 k - 3.1 kΩ 

     Replace the S70L Steering Wheel Controls Switch - Left.

   • If between 2.1 k - 3.1 kΩ 
4. All OK.