Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify that DTC B1015 is not set.
- If the DTC is set
- Program the control module that set the DTC.
- Verify that DTC B1015 is not set.
- If the DTC is set, replace the control module that set the DTC.
- If the DTC is not set
- All OK
- If the DTC is not set
- All OK