LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Fuse Block Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Unlock the retaining tabs on the fuse block and open the cover.
    Fig 1: Positive Battery Cable Nut
    GM2327660Courtesy of GENERAL MOTORS COMPANY
  3. Remove the positive battery cable nut (1) and the positive battery cable (2) from the battery.
  4. Remove fuse plate (1) from fuse block.
    Fig 2: Fuse Plate
    GM2327658Courtesy of GENERAL MOTORS COMPANY
  5. Remove the bolts (1) retaining the wiring harness to the fuse plate and remove wiring harness.
    Fig 3: Fuse Plate And Bolts
    GM2327656Courtesy of GENERAL MOTORS COMPANY
  6. Remove fuse block housing fasteners (1, 2) and fuse block housing (3).
    Fig 4: Fuse Block Housing Fasteners
    GM2327655Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals