LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  3. Remove the battery tray. Refer to Battery Tray Replacement .
  4. Disconnect the body harness connector (1) from the battery current sensor (2).
    Fig 1: Body Harness Connector
    GM3611688Courtesy of GENERAL MOTORS COMPANY
  5. Remove the battery negative ground cable fastener (3) and the battery negative cable (4) from the frame rail.
  6. Remove the battery current sensor (2) from the battery negative cable (1).
    Fig 2: Battery Current Sensor
    GM2917957Courtesy of GENERAL MOTORS COMPANY
    NOTE: Note the orientation of the battery current sensor when removing.
scientia non olet · About LEMON Manuals