Park Assist System Flash Code Procedures: Introduction
NOTE:
The four modes of self-diagnosis must be performed with less than 30s of inactivity between modes, or the system will return to normal. The ignition must be cycled to re-enter diagnostic mode.
There are four modes of self-diagnosis. These modes must be followed in the following order:
- Entering diagnostics mode
- Requesting number of fault codes mode
- Requesting fault codes mode
- Clearing fault codes mode
The procedures below are designed to assist in the flashing of these codes. Before you start, read these procedures carefully and completely. For further information regarding the Park Assist System, refer to Parking Assist Description and Operation .