Park Assist System Flash Code Procedure - REQUESTING FAULT CODES MODE
NOTE:
The first digit and second digit of the code have a different tone
- Press the park assist switch once.
- The P28 Speaker - Parking Assist will sound once.
- The park assist switch indicator will flash and P28 Speaker - Parking Assist will sound the first digit of the fault code followed by a 1s pause. Now the park assist switch indicator will flash and P28 Speaker - Parking Assist will sound the second digit of the fault code followed by a 4s pause.
- The fault codes will repeat 5 times and then exit self diagnosis mode. Write down the codes.