Component Testing
- Ignition OFF, disconnect the X3 harness connector at the X85 Steering Wheel Air Bag Coil.
- Test the resistance between the signal circuit terminal 2 and the low reference circuit terminal 5 while pressing the appropriate steering wheel controls switch button listed below:
Function Switch Minimum Resistance Value Maximum Resistance Value Phone send 710 Ω 740 Ω Source Switch .5 Ω 3 Ω Seek Down 305 Ω 340 Ω Seek Up 110 Ω 135 Ω - If not the specified value
Replace the S70L Steering Wheel Controls Switch - Left.
- Go to next step: If the specified value
- If not the specified value
- Test the resistance between the signal circuit terminal 3 and the low reference circuit terminal 5 while pressing the appropriate steering wheel controls switch button listed below:
Function Switch Minimum Resistance Value Maximum Resistance Value Phone End 305 Ω 340 Ω Volume Down .5 Ω 3 Ω Volume Up 110 Ω 135 Ω - If not the specified value
Replace the S70L Steering Wheel Controls Switch - Left.
- Go to next step: If the specified value
- If not the specified value
- All OK