Auxiliary Chassis Control Module Replacement - Trailer Brake

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Auxiliary Chassis Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Lifting and Jacking the Vehicle Remove the spare tire.
1	Chassis Control Module Fastener (Qty: 3) CAUTION: Fastener Caution Tighten 9 N.m (80 lb in)
2	Auxiliary Chassis Control Module- Trailer Brake Procedure Disconnect the electrical connector. Perform the necessary programming and setup procedure:Control Module References Lower the vehicle. Lifting and Jacking the Vehicle

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the spare tire.

Chassis Control Module Fastener (Qty: 3)

CAUTION:

Fastener Caution

Tighten
9 N.m (80 lb in)

Auxiliary Chassis Control Module- Trailer Brake

Procedure

Disconnect the electrical connector.
Perform the necessary programming and setup procedure:Control Module References
Lower the vehicle. Lifting and Jacking the Vehicle