System Operation

The video processing control module sends voltage and a constant ground to power the cameras. Video signal + and video signal - circuits carry the video image from the cameras to the video processing control module for processing. The video processing control module will then send the processed image output to infotainment system by Video signal + and video signal - circuits. Additionally, all the video signal circuits are twisted and shielded to prevent any interference which may lead to a loss of video signal resolution and cause a degraded video image. These circuits must not be spliced/removed from shielding or will cause image degradation.

The video processing control module receives serial data information of Steering Wheel angle from Body Control Module during Reverse.