Installation Procedure

Remove the special tool: EN-6015 plugs

Fig 1: Fuel Feed Front Pipe
Courtesy of GENERAL MOTORS COMPANY
Fuel Feed Front Pipe (2) @ Fuel Feed Pipe (1)» Connect - Metal Collar Quick Connect Fitting Service
Remove the special tool: EN-6015 plugs

Fig 2: Fuel Feed Front Pipe
Courtesy of GENERAL MOTORS COMPANY
Fuel Feed Front Pipe (1) @ Fuel Pump (2)» Connect - Metal Collar Quick Connect Fitting Service
Fuel Pump Insulator (3) @ Fuel Pump (1)» Install

Fig 3: Fuel Pump Insulator
Courtesy of GENERAL MOTORS COMPANY
Connect the electrical connector. (2)
Engine Wiring Harness Bracket» (2) Install

Fig 4: Engine Wiring Harness Bracket Bolts
Courtesy of GENERAL MOTORS COMPANY
Engine Wiring Harness Bracket Bolt (1)» Install and tighten [2x] 9 N.m (80 lb in)
CAUTION: Fastener Caution
Charge Air Cooler Outlet Air Hose» Install - Charge Air Cooler Outlet Air Hose Replacement
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
Start the engine and check for fuel leaks.