LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Cruze L >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Control Module Calibration >> Internal Steering Angle Sensor Centering
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Internal Steering Angle Sensor Centering

The centering procedure of the internal steering angle sensor can be completed with the following steps:

Conditions: Front axle measured and set, engine running, vehicle speed 0 km/h (0 MPH), internal steering angle sensor is activated.

  1. Using the steering wheel, align the front wheels in the center forward position.
  2. Using a scan tool, perform the Configuration/Reset Functions, Steering Wheel Angle Sensor Centering procedure.
  3. Steer from the center position slowly 90° to the left.
  4. Steer slowly back to the center position and then slowly 90° to the right.
  5. Steer slowly back to the center position.
  6. Perform the steering movements again.
  7. Centering procedure is completed.
scientia non olet · About LEMON Manuals