Circuit/System Verification
- Verify the engine cranks.
- If the engine does not crank
Refer to Starter Solenoid Does Not Click (Without KL9) and/or Starter Solenoid Does Not Click (KL9) .
- If the engine cranks
- If the engine does not crank
- Ignition ON.
- Verify DTC P0562 is not set.
- If the DTC sets
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If the DTC does not set
- If the DTC sets
- Verify DTC P129D is not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify DTC P129D is not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.