ECM Replacement
WARNING: This page is about a different car, the 2015 GMC Savana 3500, 2015 GMC Savana 2500, 2015 Chevrolet Express 3500, and 2015 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
If the engine control module (ECM) is replaced, the following procedures must be performed:
- The ECM Reprogramming-Refer to Service Programming System (SPS) .
- The CKP Variation Learn-Refer to Crankshaft Position System Variation Learn .
- The Throttle Learn procedure-Refer to Q38 Throttle Body: Throttle/Idle Learn .
- The Theft Deterrent Programming-Refer to Theft Deterrent Module Programming and Setup .
- Engine Oil Life Remaining-When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was replaced.
- Transmission Fluid Life Remaining-When available, use a scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was replaced.