Installation Procedure
WARNING: This page is about a different car, the 2015 GMC Savana 3500, 2015 GMC Savana 2500, 2015 Chevrolet Express 3500, and 2015 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the following to install the door lock receiver (1) to the door lock receiver bracket.
Slide the tab on door lock receiver (1) into the door lock receiver bracket and snap into place to secure.
- Connect the electrical connector (1) to the door lock receiver (2).
- Install the I/P trim panel. Refer to Instrument Panel Upper Trim Pad Replacement .
- Refer to Control Module References for programming and setup information.