Active Safety Control Module Replacement

Fig 1: Active Safety Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Reposition Rear Compartment Side Trim Replacement - Left Side (Without HP4)Rear Compartment Side Trim Replacement - Left Side (With HP4)
1	Active Safety Control Module Bracket Bolt (Qty: 2) CAUTION: Fastener Caution Procedure Loosen the active safety control module bracket retaining bolts and reposition from the interior body panel. Tighten 2.5 N.m (22 lb in)
2	Active Safety Control Module Procedure Release the locking retainer from the active safety control module bracket. Disconnect the electrical connectors. Perform the necessary programming and setup procedure: Control Module References

Callout

Component Name

Active Safety Control Module Bracket Bolt (Qty: 2)

CAUTION:

Procedure
Loosen the active safety control module bracket retaining bolts and reposition from the interior body panel.
Tighten
2.5 N.m (22 lb in)

Active Safety Control Module

Procedure

Release the locking retainer from the active safety control module bracket.
Disconnect the electrical connectors.
Perform the necessary programming and setup procedure: Control Module References