Installation Procedure
- If replacing the engine control module, reprogram the module. Control Module References
- Install Engine Control Module (3)
- Install Engine Control Module Cover (2)
- Engage Engine Control Module Bracket Retaining Tabs (1) (Qty: 2)
- Install Engine Control Module And Bracket Assembly (2)
- Install Engine Control Module Bracket Bolt (1) to 9 N.m (80 lb in)
- Connect Electrical Connector at Engine Control Module.
- Connect Battery Negative Cable Disconnection and Connection (with KL9)Battery Negative Cable Disconnection and Connection (without KL9) .
CAUTION:
Refer to Fastener Caution .