LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Transfer Case Control Module Programming and Setup (NQF) >> Programming an Existing or New Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing or New Control Module

To program an existing or new control module, perform the following procedure:

  1. Install the special tool: EL-49642 SPS Programming Support Tool
  2. Ignition - On / Vehicle - In Service Mode
  3. Access SPS and follow the on-screen instructions for the control module:K69 Transfer Case Control Module
  4. Perform the SPS function:K69 Transfer Case Control Module-Programming
  5. Perform the scan tool configuration/reset function:Range Actuator Learn
scientia non olet · About LEMON Manuals