Circuit/System Verification
- Ignition ON.
- Verify DTC P0602 or P0630 is not set.
- If the DTC is set
- Program the K20 ECM.
- Verify the DTC does not set.
- If the DTC sets, replace the K20 ECM.
- If the DTC does not set
- All OK.
- If the DTC is not set
- Verify DTC P0601, P0603, P0604, P0606, P062F, P16F3 or P262B is not set.
- If DTC P0601, P0603, P0604, P0606, P062F, P16F3 or P262B is set
Replace the K20 ECM.
- If the DTC is not set
- If DTC P0601, P0603, P0604, P0606, P062F, P16F3 or P262B is set
- All OK.