Front View Camera Module Calibration Error (16-K-013)

Publication date: 2016-09-12
Reference number: 16-K-013

FRONT VIEW CAMERA MODULE CALIBRATION ERROR

TECHNICAL SERVICE BULLETIN

Reference Number(s): 16-K-013, Date of Issue: Sep 12, 2016

SERVICE INFORMATION

Make:	Model:	Model Year:		VIN:		Engine:	Transmission:
Make:	Model:	from	to	from	to	Engine:	Transmission:
Opel	Karl	2016	2017			All	All
Vauxhall	VIva	2016	2017			All	All
Chevrolet	Spark	2016	2017			All	All

Involved Region or Country (Optional)	Europe, United States and Canada, Korea
Option (RPO)	UFL
Condition	Cannot complete front view camera module calibration (Camera learn) even after enough time driving under the proper front view camera learn condition after SPS programming (Configuration & Setup). - This condition occur only in vehicles equipped with the front view camera module part number #39025713
Cause	Front view camera module software error

CORRECTION

Stop camera learn mode, update GDS2 version and reprogram the module with new software.

SERVICE INFORMATION

Working Procedure:

Stop the Front View Camera Learn Mode
- Update / Install the new diagnostic package in GDS2.
  - New Version : V2016.8.0 (Date : 2016-07-18)
- Turn the vehicle ignition off.
- Perform the Cancel Camera Learn via newly added GDS2 application 'Cancel Camera Learn'.
IMPORTANT:
Be sure to turn vehicle ignition off before commanding the 'Cancel Camera Learn'
Reprogram the Front Camera View Module.
(Please refer to front view camera reprogram & calibration in GSI)
1. Reprogram the front view camera module with new software using the Service Programming System (SPS)
  - New operational software number #39057844
2. At the end of programming, choose the "Clear All DTCs" function on the SPS screen
3. Perform the module calibration (Camera Learn).
  - The Front View Camera Learn procedure will start automatically after SPS programming (Configuration & Setup) is complete. During this time the Lane Departure Warning amber indicator will illuminate.
4. Operate the vehicle in the following conditions until the calibration is complete.
  - Clean windshield.
  - Avoid lane changes.
  - Maintain vehicle speeds between 56-90 km/h (35-56 MPH).
  - Ensure the road contains visible references (well defined lane markings, curbs, etc.).

IMPORTANT:

Once the procedure is complete, the amber indicator will turn off. Shortly after the green ready to assist light should turn on as long as all conditions are met for normal operation.

SERVICE INFORMATION

Service Part Name:	Operation Software Number:	Catalogue Number (optional):	Parts Quantity:
Front View Camera	39057844		N/A

Labor Code:	Description	Hours:
2810835	Front View Camera Reprogramming	0.3
Other labor hours(OLH) : You may claim up to the allowable labor hours depending on actual time to perform the front view camera module calibration(0.1 ~ 0.4 hrs). For Korea only : Use the labor code "2810838" for other labor hours(OLH).

The regular Warranty and Policy Procedures will apply.

SERVICE INFORMATION

Bulletin Version	1
Modified History