Unsuccessful Programming Recovery
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
In the event of an interrupted or unsuccessful programming event, perform the following steps:
- Ignition ON. Ensure the K109 Frontview Camera Module, DLC and programming tool connections are secure and the SPS software is up to date.
- Verify the K109 Frontview Camera Module can be reprogrammed.
- If the K109 Frontview Camera Module cannot be reprogrammed
- Ignition OFF for 1 min, ignition ON.
- Verify the K109 Frontview Camera Module can be reprogrammed.
- If the K109 Frontview Camera Module cannot be reprogrammed, replace the B174W Frontview Camera - Windshield.
- If the K109 Frontview Camera Module can be reprogrammed.
- All OK.
- If the K109 Frontview Camera Module can be reprogrammed
- All OK.