Replace and Program the Front and Rear Parking Assist Control Module
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
If the K41 Front and Rear Parking Assist Control Module needs to be replaced, the following procedures must be performed:
- Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS)
- Perform the SPS function K41 Front and Rear Parking Assist Control Module Programming and follow the on-screen instructions.
- Perform the SPS function K41 Front and Rear Parking Assist Control Module Configuration and follow the on-screen instructions.
- Clear DTCs after completing the programming procedure.