Unsuccessful Programming Recovery
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
In the event of an interrupted or unsuccessful programming event, perform the following steps:
- Ignition ON. Ensure the control module, DLC and programming tool connections are secure and the SPS software is up to date.
- Verify the control module can be reprogrammed.
- If the control module cannot be reprogrammed
- Ignition OFF, all access doors closed, all vehicle systems OFF for one minute, ignition ON.
- Verify the control module can be reprogrammed.
- If the control module cannot be reprogrammed, replace the control module.
- If the control module can be reprogrammed.
- All OK.
- If the control module can be reprogrammed
- All OK.
NOTE:
If USB programming was interrupted, a 5 minute recovery time period may be necessary before the software will reinitialize. Wait 3 minutes with the ignition OFF, all access doors closed, and all vehicle systems OFF. Upon restarting the USB portion of the programming, the display will show a countdown timer for up to 5 minutes before proceeding with the USB File Transfer..