LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Suburban 3500 HD LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Programming And Setup - All Systems) >> Repair Instructions >> K20 Engine Control Module: Programming and Setup >> Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Control Module

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

To reprogram an existing K20 Engine Control Module, perform the following procedure:

  1. Install EL-49642  SPS programming support tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. Clear DTCs after completing the Programming procedure.
    4. NOTE:

    If vehicle fails to start during Configuration and Setup, perform the SPS Function Immobilizer Learn and follow the on-screen instructions.

  4. Perform the SPS function Engine Control Module - Configuration & Setup and follow the on-screen instructions, if available.
  5. Clear DTCs after completing the Configuration & Setup procedure.
scientia non olet · About LEMON Manuals