Replace and Program The Control Module
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
To program a replacement hands-free liftgate sensor control module, perform the following procedure:
- Connect the scan tool to the vehicle.
- Select Module Diagnosis:
- Select Liftgate Control Module:
- Select Configuration/Reset Functions:
- Select Remove/Reset Module:
- Select Hands-Free Liftgate Sensor Control Module Calibration:
- Press "Enter" and follow the on screen instructions: