LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Suburban 3500 HD LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Programming And Setup - All Systems) >> Repair Instructions >> Radar Sensor Module - Long Range Programming and Setup >> Replace and Program Radar Sensor Module - Long Range or Reprogram Radar Sensor Module - Long Range
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Radar Sensor Module - Long Range or Reprogram Radar Sensor Module - Long Range

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing Long Range Radar Sensor Module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select B233B Radar Sensor Module - Long Range - Programming and follow the on-screen instructions.
  3. Ignition OFF and all vehicle systems OFF. It may take up to 2 minutes for all vehicle systems to power down.
  4. Following programming, the module alignment must be calibrated.

    Refer to Radar Sensor Module - Long Range Calibration .