LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Suburban 3500 HD LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Programming And Setup - All Systems) >> Repair Instructions >> Trailer Lamp Control Module Programming and Setup >> Trailer Lighting Control Module Configuration/Reconfiguration and Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trailer Lighting Control Module Configuration/Reconfiguration and Setup

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

If the trailer lighting control module is replaced or installed as an after sales accessory, both the configuration/reconfiguration and setup procedures must be performed.

  1. Access the Service Programming System (SPS) and follow the on-screen instructions. Refer to Service Programming System (SPS) .
  2. On the SPS Supported Controllers screen, select Trailer Interface (Control) Module - Configuration and Setup.
  3. On the Control Module - Configuration and Setup Function(s) screen, select both ECU Configuration/Reconfiguration and ECU Setup menu options and follow the on-screen instructions.
  4. Clear DTCs after completing the configuration/reconfiguration and setup procedures.

If the trailer lighting control module fails to accept the configuration/reconfiguration and setup procedures, verify all scan tool and trailer lighting control module connections are secure.

scientia non olet · About LEMON Manuals